Home - Products - Aluminum Foil - Aluminium Pharmaceutical Foil

Products

Aluminum Coil

1000 Series2000 Series3000 Series4000 Series5000 Series6000 Series7000 Series8000 Series

Aluminum Sheet

Matt Aluminum SheetEmbossed Finish Aluminum SheetChecker Finish Aluminum SheetAnodized Aluminum SheetAluminum Mirror SheetAluminum Perforated PlateAluminum Single PanelAluminum Composite Panel (ACP)Aluminum Pre-stretched PlateAluminum Quenched PlateAluminum Sheet for Bottle CapsHot Rolled Thick Aluminum PlateAluminum Sheet for PS Plate

Aluminum Foil

Aluminium Pharmaceutical FoilAir Condition Aluminum FoilHousehold Aluminum FoilContainer Aluminum FoilAdhesive Tape Aluminum Foil Aluminium Hot Seal FoilAluminum Cigarette Packing FoilBeer Mark Aluminium FoilAluminium Cable FoilPackaging Aluminum FoilHot Stamping FoilLidding & Yogurt Aluminum Foil

Color Coated Aluminum

PE (Polyester) Coating Aluminum CoilPVDF Color Coated Aluminum CoilWooden Grain Finish Aluminum CoilMarble Finish Color Coated Aluminum CoilColor Coated Mirror Aluminum Coil & SheetBrushed Finish Color Coated Aluminum CoilEmbossed Finish Color Coated AluminumImitation Copper Door Finish Aluminum Sheet

Aluminium Pharmaceutical Foil

Our aluminum pharmaceutical foils are soft in reel form, one side laminated with film, and other side printing primer coated. These foils can be printed to customers' requirement or un-printed. It is used for strip packing of tablets and capsules.



Specification of Aluminum Pharmaceutical Foil :

 

Alloy

1235, 8011

Temper

O, H18

Thickness

0.0065~0.046mm

Tolerance +/-4%

Width

100~1220mm

Tolerance +/- 1.0 mm

Coil ID

75, 150

 

Chemical Compositions of Aluminum Pharmaceutical Foil :

 

Alloy

Fe

Si

Cu

Mn

Mg

Cr

Zn

Ni

Ti

Other

Al

Each

Total

1235

0.65

0.05

0.05

0.05

-

0.1

-

0.06

0.05

0.15

99.35

8011

0.6~1.0

0.50~0.9

0.1

0.2

0.05

0.05

0.1

-

0.08

0.05

0.15

Remains

 

Mechanical Properties of Aluminum Pharmaceutical Foil :

 

Alloy

Temper

Tensile strength

Elongation

8011

H18

>175 MPa

>2.5%

1235

H18

>150 MPa

>2.5%

8011

O

>85 MPa

>3.5%